Vista Fume Hood

Features and Benefits:

• The back panel on single units is why Resin-Chem with an option for 1/4″ laminated safety glass. Side panels and sash are also 1/4″ laminated safety glass.
• Island units have 1/4″ laminated safety glass back, sides and sash.
• Up to four optional remoate control service fixtures (gas, air, vac, cw, etc.) can be furnished on each side of the hood. Service controls are mounted on the face of the base cabinet.
• If service fixtures are not specified the fixture mounting holes are plugged for future use.
• An automatic sash stop is provided to stop the sash at 18″ above the counter top.
• Sash full height opening is 30 1/4″ above the counter top.
• Standard counter top material is epoxy resin with optional cupsink. Other top materials are also available.
• A combination spill trough airfoil along the front edge of the counter top provides for secondary spill containment while providing a flush airfoil for easy hood access.
• Narrow post design provides improved visibility and airflow.
• Service fixtures are mounted on an isolated vertical service drop to maximize useable work surface area.
• Uniform airflow is accomplished through the use of perimeter exhaust slots.
• Equipped with an upper air bypass for constant exhaust volume.
• Restricted bypass for VAV exhaust systems are also available.
• Automatic sash stop is provided to stop the sash at 18″ above the countertop.
• Laminated safety glass sash with full width PVC pull
• Interior lined with “Resin-Chem”
• Vapor proof incandescent light fixtures

Additional Resources:

What Type of Fume Hood Does Your Lab Need?

Why Does Your Lab Need a Fume Hood?