  |
The Model 335 Laboratory Fume Hood Monitor surpasses the protection offered by other monitors. It features prominent LEDs to indicate hood status, a digital display of the actual measured face velocity and the ability to warn of unsafe high face velocities.
Includes mounting hardware, tubing, sidewall adapter, power supply and installation instructions.
Instrument Dimensions:
Front Face Plate: 5.25 Length x 3.00 Wide x 0.625 Deep
Rear Enclosure: 3.0 Length x 2.0 Wide x 0.5 Deep
Additional Features and Specifications
| Alarm Range: | 50-250 fpm |
| Alarm Set Point: | Low and High |
| Alarm Delay Interval: | User Configurable through menu |
| Visual Displays: | Analog Bar graph/Digital LCS can be enabled |
| Normal | Green Zone |
| Alarm | Red Zone |
| Marginal | Yellow Zone |
| LEDs: | All Jumbo |
| Audible Alarm Levels: | 85 dB @ 10 cm |
| Horn Silence: | Temporary & Permanent |
| High Flow Alarm Disable: | Yes |
| Emergency Purge: | Yes |
| Mounting: | Flush |
| Operating Temperature: | 55-86 degrees F (13-30 degrees C) |
| Storage temperature: | -40 to 150 degrees F (-40 to 65 degrees C) |
| Power Requirement: | 9 - 30V AC/DC |
| Agency Listing: | CE, UL |
Our commitment does not begin with just providing products. LOC will guide you through your laboratory project from inception to completion. One of our experienced Product Specialists will assist you in evaluating your specific laboratory needs and help you to select the best products for your application.
