Low Bench Hood

LOC Scientific Low bench Fume Hood

Large apparatus or complex set-ups may require the use of a Fume Hood specifically designed to meet these requirements. The LOC Low Bench Fume Hood is supported by an 18" high table and has an interior height of 63 3/4". 

Design

  • Four panel horizontal sliding sash
  • Sash is 7/32" laminated safety glass with full width flush PVC pull Stainless Steel “U” Channel Glass Trim
  • Includes audible LOC500 airflow monitor for safety
  • Counterweight provides one finger operation
  • Hood entrance is framed with inward-angled members to minimize turbulence and provide smooth air movement in hood at face velocities ranging from 60 to 150 FPM
  • Stainless steel airfoil allows 1" of airflow across the work surface when sash is in the closed position
  • Standard "Resin-Chem" Liner with removable access panels
  • Removable exterior side panels
  • Double wall construction for ease of routing service piping
  • Removable exterior side panels
  • Lights are mounted above a sealed safety glass panel keeping corrosive fumes and hazardous vapors isolated
  • Tube light can easily be replaced through the top front

Options

  • Optional service fixtures are available for installation of the low bench fume hood
  • Mounting holes for service fixtures and electrical receptacles are pre-cut and capped when fixtures are not required

Specifications

LOC Scientific Low Bench Fume Hood DimensionsLOC Scientific Low Bench Fume Hood Specifications

The static pressures listed above are for the hoods only. An appropriate amount will need to be added to this figure to compensate for the pressure drop through the duct system. The total pressure drop through the hood and the duct system must be known to select the proper exhaust blower.

Additional Resources